Deco Processes

SS, HS, SPRAY COATING, METALIZATION, HEAT TRANSFER


Decoration for Cosmetic Packaging

Decoration process of cosmetic packaging is very significant. Good decoration could add values on products, on the contrary, a bad one would be superfluous and lose customer's focus.

Limner Tech set up some decoration process line in-house, such as SS (silk-screen print), pad print, HS (Hot Stamping) and in-mold labeling. We are also able to supply outsourced decoration services, such as metallization and color spray, etc. Hope to meet customer's needs comprehensively.


Introduction of common decoration as follow:

img-service-deco_1-ss.jpg

Rich in stereoscopic feeling
For cylinder or simple curved shape.
For general resin (need a special treatment before print on PP / PE bottles.
For cost saving, allow to print front and back side in one pass, depends on the shape.

img-service-deco_2-pad-print.jpg

Precise multi-color allocation
For shapes of flat or specific curve.
For general resin (need a special treatment before print on pp / pe bottles.)
Print front / back side separately.

img-service-deco_3-hs.jpg

For flat shape
For ABS, AS, PET, PETG resin (need a special treatment before print on PP / PE bottles.)
Standard color is shiny gold / silver, if not, an extra charge is needed.

img-service-deco_4-metalization.jpg

Only for ABS resin
For general, metalization process includes UV coating, therefore it has a nice adhesion ability.
If other deco needs to apply on it, it's necessary to adjust the hardness of UV coating, the adhesion will be lower as well.

img-service-deco_5-inner-spray.jpg

For PMMA / AS resin.
Due to the spray is held inside, the adhesion of it is not important, UV coating is not necessary neither.

img-service-deco_6-outer-spray.jpg

For general, it includes UV coating, therefore it has a nice adhesion ability.
If other deco needs to apply on it, it's necessary to adjust the hardness of UV coating, the adhesion will be lower as well.
Note: the bottle would become easier to break after the process.

img-service-deco_7-heat-transfer.jpg

For ABS resin
For flat object only
A UV coating is needed to pass the alcohol wiping test.
Higher charge for pattern script.
High MOQ of films. long sampling time.

img-service-deco_8-inkjet.jpg

For ABS resin
For flat shape only
Esp. for multi-colour script
A UV coating is needed to pass the alcohol wiping test.
Higher charge for pattern script.
No script charge. Fast sampling time.
Easy to change the script. hight charge for printing fixtures.

img-service-deco_9-rim-hs.jpg

For ABS / AS resin.
The adhesion on the surface of PP is not good.

img-service-deco_10-in-mold-labeling.jpg

Only for PP / PE bottles.
Only for extrusion bottles.
High MOQ of films.


pdf.png Decoration Illustration

pdf.png Decoration Intro (EN)