Emulsion


Emulsion

The key feature of emulsion is its high water content which could keep skin moist and moisture dry skin instantly. Emulsion would form a thin breathable protective film keep outer dry air apart.

Emulsion product is compatible with PET / PP / PE bottle and pump.

View:

STA Overcap Heavy-Wall PET Bottles 100ml

STA series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STA series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STA series is our original design with modern simplicity shape. The shape is in cone and section in square, which results in separated SS print for front / back side and a difficult HS. The buyers should consider it as a cause of higher cost for decoration.

TB5 PET Heavy-Wall Bottle 100ml

TB-5 series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, TB-5 series bottles are very suitable for essence and serum, much better than PET-G bottles.

TB-5 series is our original design with modern simplicity shape. The shape is in cone, which results in separated SS prints for front / back side and a difficult HS. The buyers should consider it as a cause of higher cost for decoration.

30 / 50 / 100ml, three kind of capacity of TB-5 for customers to choose from.

Oval-C PET Bottle 120ml

OVAL-C PET Bottle is made by 1-Step Injection-Stretch-Blow (ISBM) process, which make the screw in fixed orientation. It's the key feature of 1-Step ISBM bottles.

Other features of ISBM bottles includes: uniform thickness, shaping ability, adjustable weight and flexible coloured molding, etc.

OVAL-C PET Bottle is suitable for toner, lotion and emulsion and along with pumps.

Diamond Lotion Bottle with Pump 150ml

Diamond Series is our first set of public product, which was considered as a presentation of our 40-years mold-making experience and technology. The key feature of Diamond Series is the diamond-shape engraving on the both sides. Through geometric arrangement, it could reveal a beautiful sight of light refraction.

The engraving could also create a new experience of tactile memory which is the correlation of brand identity and brand loyalty.

Diamond Lotion Bottle is a PETG single-layer one. It is suitable for toner, lotion and emulsion.

Diamond Lotion Bottle with Pump 120ml

Diamond Series is our first set of public product, which was considered as a presentation of our 40-years mold-making experience and technology. The key feature of Diamond Series is the diamond-shape engraving on the both sides. Through geometric arrangement, it could reveal a beautiful sight of light refraction.

The engraving could also create a new experience of tactile memory which is the correlation of brand identity and brand loyalty.

Diamond Lotion Bottle is a PETG single-layer one. It is suitable for toner, lotion and emulsion.

Collar High Airless Bottle 15ml

For eco-friendly recycling concern, most of components are made of PETG resin. CCOLLAR HIGH AIRLESS BOTTLE (ARHI) has five sizes: 15/20 / 30 /40/ 50mL

For the high collar design, this series provides a strong sense of flush and identification.

Customers could choose pump (dosage 0.25cc) or sprayer (dosage 0.07cc) to meet needs.

Collar High Airless Bottle 20ml

For eco-friendly recycling concern, most of components are made of PETG resin. CCOLLAR HIGH AIRLESS BOTTLE (ARHI) has five sizes: 15/20 / 30 /40/ 50mL

For the high collar design, this series provides a strong sense of flush and identification.

Customers could choose pump (dosage 0.25cc) or sprayer (dosage 0.07cc) to meet needs.

Collar High Airless Bottle 30ml

For eco-friendly recycling concern, most of components are made of PETG resin. CCOLLAR HIGH AIRLESS BOTTLE (ARHI) has five sizes: 15/20 / 30 /40/ 50mL

For the high collar design, this series provides a strong sense of flush and identification.

Customers could choose pump (dosage 0.25cc) or sprayer (dosage 0.07cc) to meet needs.

Collar High Airless Bottle 40ml

For eco-friendly recycling concern, most of components are made of PETG resin. CCOLLAR HIGH AIRLESS BOTTLE (ARHI) has five sizes: 15/20 / 30 /40/ 50mL

For the high collar design, this series provides a strong sense of flush and identification.

Customers could choose pump (dosage 0.25cc) or sprayer (dosage 0.07cc) to meet needs.

Collar High Airless Bottle 50ml

For eco-friendly recycling concern, most of components are made of PETG resin. CCOLLAR HIGH AIRLESS BOTTLE (ARHI) has five sizes: 15/20 / 30 /40/ 50mL

For the high collar design, this series provides a strong sense of flush and identification.

Customers could choose pump (dosage 0.25cc) or sprayer (dosage 0.07cc) to meet needs.

TB9 PET thick bottle 100ml

The TB-9 PET thick bottle is an ultra-high-thick plastic bottle made with AQUAPET™ patented technology. It can present a thick and transparent feeling that is almost glassy. It is very suitable for high-priced products such as essences, liquid foundations, and essential oils.

The shape of TB-9 is simple, its cross-section is round, which is longer and thinner than TB-4, and the chamfer is sharper. The front and back sides can be printed at the same time during printing, which can reduce the cost of decoration processing. This series provides three capacities of 30/50/100ml for customers to choose.

Classical Airless Bottle 50ml

The shape of CLASSICAL Airless Bottle (ARAR) is simply neat, by the combination of colour or decoration processes, it could reveal different character. It very nice to play any role in a suite products.

Having 4 sizes (15 / 20 / 30 / 50ml) for choice.