Ø 20mm


Ø 20mm Nech Finish

The capacity of bottle with Ø 20mm neck finish is among 30 ~ 100ml. The main products of it are PET heavy-wall bottles, travel set and ISBM PET bottles.

View:

TB4 PET Heavy-Wall Bottle 30ml

TB-4 series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, TB-4 series bottles are very suitable for essence and serum, much better than PET-G bottles.

TB-4 series is our original design with modern simplicity shape. The section is in round, which results in combined SS prints for both front / back side and a lower cost for decoration.

30 / 50ml, two kind of capacity of TB-4 for customers to choose from.

STC Overcap Heavy-Wall PET Bottles 100ml

STC series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STA series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STC series is our original design with classical shape. The shape is in cylinder and section in round, which results in a combined SS print for both front / back and a lower cost for decoration.

STC Overcap Heavy-Wall PET Bottles 50ml

STC series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STA series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STC series is our original design with classical shape. The shape is in cylinder and section in round, which results in a combined SS print for both front / back and a lower cost for decoration.

STC Overcap Heavy-Wall PET Bottles 30ml

STC series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STA series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STC series is our original design with classical shape. The shape is in cylinder and section in round, which results in a combined SS print for both front / back and a lower cost for decoration.

STB Overcap Heavy-Wall PET Bottles 50ml

STB series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STB series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STB series is our original design with modern simplicity shape. The shape of section in square, which results in separated SS print for front / back side and a difficult HS. The buyers should consider it as a cause of higher cost for decoration.

STB Overcap Heavy-Wall PET Bottles 30ml

STB series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STB series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STB series is our original design with modern simplicity shape. The shape of section in square, which results in separated SS print for front / back side and a difficult HS. The buyers should consider it as a cause of higher cost for decoration.

STA Overcap Heavy-Wall PET Bottles 100ml

STA series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STA series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STA series is our original design with modern simplicity shape. The shape is in cone and section in square, which results in separated SS print for front / back side and a difficult HS. The buyers should consider it as a cause of higher cost for decoration.

STA Overcap Heavy-Wall PET Bottles 50ml

STA series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STA series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STA series is our original design with modern simplicity shape. The shape is in cone and section in square, which results in separated SS print for front / back side and a difficult HS. The buyers should consider it as a cause of higher cost for decoration.

STA Overcap Heavy-Wall PET Bottles 30ml

STA series products embodies Limner Tech's patented technology, which makes PET bottles more transparent and thicker, looks just like glass, but never breaks. Because of the chemical resistance of PET resin, STA series bottles are very suitable for essence and serum, much better than PETG bottles.

The Shoulder Heavy-Wall PET Bottle is an extension design of TB series bottle. Adding shoulder and over cap to make a "Flush" shape, and upgrade the completeness of design.

STA series is our original design with modern simplicity shape. The shape is in cone and section in square, which results in separated SS print for front / back side and a difficult HS. The buyers should consider it as a cause of higher cost for decoration.

TB9 PET thick bottle 100ml

The TB-9 PET thick bottle is an ultra-high-thick plastic bottle made with AQUAPET™ patented technology. It can present a thick and transparent feeling that is almost glassy. It is very suitable for high-priced products such as essences, liquid foundations, and essential oils.

The shape of TB-9 is simple, its cross-section is round, which is longer and thinner than TB-4, and the chamfer is sharper. The front and back sides can be printed at the same time during printing, which can reduce the cost of decoration processing. This series provides three capacities of 30/50/100ml for customers to choose.

TB9 PET thick bottle 50ml

The TB-9 PET thick bottle is an ultra-high-thick plastic bottle made with AQUAPET™ patented technology. It can present a thick and transparent feeling that is almost glassy. It is very suitable for high-priced products such as essences, liquid foundations, and essential oils.

The shape of TB-9 is simple, its cross-section is round, which is longer and thinner than TB-4, and the chamfer is sharper. The front and back sides can be printed at the same time during printing, which can reduce the cost of decoration processing. This series provides three capacities of 30/50/100ml for customers to choose.

TB9 PET thick bottle 30ml

The TB-9 PET thick bottle is an ultra-high-thick plastic bottle made with AQUAPET™ patented technology. It can present a thick and transparent feeling that is almost glassy. It is very suitable for high-priced products such as essences, liquid foundations, and essential oils.

The shape of TB-9 is simple, its cross-section is round, which is longer and thinner than TB-4, and the chamfer is sharper. The front and back sides can be printed at the same time during printing, which can reduce the cost of decoration processing. This series provides three capacities of 30/50/100ml for customers to choose.